EAGLE – Classic Series
TECHNICAL SPECIFICATIONS
Equipment Location
EcoPak
INYE Spa Pack
Details
Outside Dimensions:
85’’ x 85’’ | 217 x 217 cm | 7′ x 7′
Height:
41’’ | 104 cm | 3′
Dry Weight:
741 Lbs | 336 Kg
Wet Weight:
3354 Lbs | 1521 Kg
Water Capacity:
313 Gallons | 1185 Liters
Heater(Watts):
NA / Euro 4000 W
Electrical Requirements North America
(A = actual / B = breaker):
240 Volts / 6 Gauge Wire
1 Pump / A32amp / B40amp
2 Pumps / A40amp / B50amp
Upgraded Classic
240 Volts / 6 Gauge Wire
1 Pump / A40amp / B50amp
2 Pumps / A40amp / B50amp
115 Volts / 14 Gauge Wire
1 Pump / A12amp / B15amp
How to Build Deck Access For a Hot Tub
Recommended Site Access and Preparation
CLASSIC SERIES WITH FOREVER FLOOR®
Most Spas Require 44” Clearance to get through gates, between houses and side fences and around corners. 9’-10’ of overhead clearance in order to move the spa into place.
To select a location for your new Arctic Spa with Forever Floor® will require a flat compact surface.
If you are using 4X4 railroad ties, they should be a maximum of 12-inch centers to properly support the entire underside of your spa.
Balconies and decks should be constructed to meet all builder codes and should be able to support up to exceed 100lbs/square foot. Remember that a gallon of water weighs roughly about 10 lbs
Your Spa can weigh as much a 1000lbs (454kg)